SAE AMS6484D
Steel, Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) Normalized and Tempered
SAE International , 07/03/2012
$35.00
$70.00
This specification covers an aircraft-quality, low-alloy steel in the form of bars, fogings, mechanical tubing, and forging stock.
These products have been used typically for parts, 3.5 inches (89 mm) and under in nominal thickness at time of heat treatment, requiring a through-hardening steel capable of developing a minimum hardness of 40 HRC when properly hardened and tempered and also for parts of greater thickness requiring proportionately lower hardness, but usage is not limited to such applications.
Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; SAE ARP 1110 recommends practices to minimize such conditions.
These products have been used typically for parts, 3.5 inches (89 mm) and under in nominal thickness at time of heat treatment, requiring a through-hardening steel capable of developing a minimum hardness of 40 HRC when properly hardened and tempered and also for parts of greater thickness requiring proportionately lower hardness, but usage is not limited to such applications.
Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; SAE ARP 1110 recommends practices to minimize such conditions.
Product Information
Published:
07/03/2012
File Size:
1 file , 55 KB
Language:
English
Note:
This product is unavailable in Ukraine, Russia, Belarus
SAE AMS6484F
$46.00
SAE AMS6484E
$37.00
SAE AMS6484D
$35.00
SAE AMSS5000A
$47.00
SAE AMS6484C
$33.00
