SAE AMS6395G
Steel Sheet, Strip, and Plate, 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140)
SAE International , 10/21/2011
$31.00
$61.00
This specification covers an aircraft-quality, low-alloy steel in the form of sheet, strip, and plate.
These products have been used typically for heat treated parts, 0.875 inch (22.22 mm) and under in section thickness at time of heat treatment, requiring through-hardening to a minimum tensile strength of 180 ksi (1241 MPa) and proportionately lower strength in heavier thicknesses, but usage is not limited to such applications.
These products have been used typically for heat treated parts, 0.875 inch (22.22 mm) and under in section thickness at time of heat treatment, requiring through-hardening to a minimum tensile strength of 180 ksi (1241 MPa) and proportionately lower strength in heavier thicknesses, but usage is not limited to such applications.
Product Information
Published:
10/21/2011
File Size:
1 file , 92 KB
Language:
English
Note:
This product is unavailable in Ukraine, Russia, Belarus
