SAE AMS6322N
Steel Bars, Forgings, and Rings, 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740)
SAE International , 11/23/2005
$35.00
$70.00
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings.
These products have been used typically for parts with section thickness of 0.375 in. (9.50 mm) and under at the time of heat treatment, requiring a through-hardening steel capable of developing hardness as high as 50 HRC when properly hardened and tempered and also parts of greater thickness but requiring proportionately lower hardness, but usage is not limited to such applications.
These products have been used typically for parts with section thickness of 0.375 in. (9.50 mm) and under at the time of heat treatment, requiring a through-hardening steel capable of developing hardness as high as 50 HRC when properly hardened and tempered and also parts of greater thickness but requiring proportionately lower hardness, but usage is not limited to such applications.
Product Information
Published:
11/23/2005
File Size:
1 file , 250 KB
Language:
English
Note:
This product is unavailable in Ukraine, Russia, Belarus
