SAE AMS5622E
Steel, Corrosion Resistant, Bars, Wire, Forgings, Tubing, and Rings, 16Cr 4.0Ni 0.30Cb 4.0Cu Solution Heat Treated, Precipitation Hardenable, Consumable Electrode Remelted
SAE International , 01/23/2008
$37.00
$74.00
This specification covers a premium aircraft-quality corrosion-resistant steel in the form of bars, wire, forgings, mechanical tubing, flash welded rings, and stock for forging, flash welded rings, or heading.
These products have been used typically for parts requiring corrosion resistance and high strength up to 600 \mDF (316 \mDC), but usage is not limited to such applications.
Certain processing procedures and service conditions may cause these products to become subject to stresscorrosion cracking; SAE ARPa1110 recommends practices to minimize such conditions.
For applications, such as bolting, where stress-corrosion is a possibility, the product should be precipitation heat treated for not less than 4 hours at the highest temperature compatible with the strngth requirements but in no case lower than 1025 \mdF (522 \mDC).
These products have been used typically for parts requiring corrosion resistance and high strength up to 600 \mDF (316 \mDC), but usage is not limited to such applications.
Certain processing procedures and service conditions may cause these products to become subject to stresscorrosion cracking; SAE ARPa1110 recommends practices to minimize such conditions.
For applications, such as bolting, where stress-corrosion is a possibility, the product should be precipitation heat treated for not less than 4 hours at the highest temperature compatible with the strngth requirements but in no case lower than 1025 \mdF (522 \mDC).
Product Information
Published:
01/23/2008
File Size:
1 file , 460 KB
Language:
English
Note:
This product is unavailable in Ukraine, Russia, Belarus
