SAE AMS4599
Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution and Precipitation Heat Treated (2219 -T81/-T851)
SAE International , 07/08/2011
$28.00
$56.00
This specification covers an aluminum alloy in the form of sheet and plate.
These products have been used typically for parts requiring high strength up to 500 øF (260 øC), but usage is not limited to such applications. Product may be welded in the specified condition but properties are improved by reheat treatment after welding. Reheat treatment after welding, however, may reduce resistance to stress-corrosion cracking. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP823 recommends practices to minimize such conditions.
These products have been used typically for parts requiring high strength up to 500 øF (260 øC), but usage is not limited to such applications. Product may be welded in the specified condition but properties are improved by reheat treatment after welding. Reheat treatment after welding, however, may reduce resistance to stress-corrosion cracking. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP823 recommends practices to minimize such conditions.
Product Information
Published:
07/08/2011
File Size:
1 file , 86 KB
Language:
English
Note:
This product is unavailable in Ukraine, Russia, Belarus
