SAE AMS4193C
Aluminum Alloy Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024-T861) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated
SAE International , 03/29/2012
$28.00
$56.00
This specification covers an aluminum alloy in the form of flat sheet and plate 0.500 inch (12.70 mm) and under in nominal thickness.
These products are used primarily for structural parts requiring good strength. These products, when re-heat treated by the user, may not have the tensile properties shown.
Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP 823 recommends practices to minimize such conditions.
These products are used primarily for structural parts requiring good strength. These products, when re-heat treated by the user, may not have the tensile properties shown.
Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP 823 recommends practices to minimize such conditions.
Product Information
Published:
03/29/2012
File Size:
1 file , 380 KB
Language:
English
Note:
This product is unavailable in Ukraine, Russia, Belarus
