SAE AMS4168J
Aluminum Alloy, Extrusions 5.6Zn 2.5Mg 1.6Cu 0.23Cr (7075-T6510) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated, Unstraightened ( Reaffirmed: May 2008 )
SAE International , 07/01/2003
$33.00
$66.00
This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing.
These products have been used typically for parts subject to excessive warpage during machining and for parts requiring high strength and whose fabrication does not involve welding or forming, but usage is not limited to such applications.
Certain design and processing procedures may cause these extrusions to become susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
These products have been used typically for parts subject to excessive warpage during machining and for parts requiring high strength and whose fabrication does not involve welding or forming, but usage is not limited to such applications.
Certain design and processing procedures may cause these extrusions to become susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
Product Information
Published:
07/01/2003
File Size:
1 file , 120 KB
Language:
English
Note:
This product is unavailable in Ukraine, Russia, Belarus
SAE AMS4168K
$40.00
SAE AMS4168J
$33.00
