SAE AMS4165H
Aluminum Alloy, Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened
SAE International , 12/03/2013
$31.00
$61.00
This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing.
These extrusions have been used typically for parts subject to excessive warpage during machining due to residual stresses and for parts requiring high strength and whose fabrication does not normally involve welding, but usage is not limited to such applications.
Certain processing procedures may cause these extrusions to be susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
These extrusions have been used typically for parts subject to excessive warpage during machining due to residual stresses and for parts requiring high strength and whose fabrication does not normally involve welding, but usage is not limited to such applications.
Certain processing procedures may cause these extrusions to be susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
Product Information
Published:
12/03/2013
File Size:
1 file , 68 KB
Language:
English
Note:
This product is unavailable in Ukraine, Russia, Belarus
SAE AMS4165J
$37.00
SAE AMS4165H
$31.00
