SAE AMS4153K
Aluminum Alloy, Extrusions 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treated
SAE International , 08/05/2003
$33.00
$66.00
This specification covers an aluminum alloy in the form of extruded bars, rods, wire, shapes and tubing.
These products have been used typically for parts requiring good strength and where fabrication does not usually involve welding, but usage is not limited to such applications.
Certain design and processing procedures may cause these extrusions to be susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
These products have been used typically for parts requiring good strength and where fabrication does not usually involve welding, but usage is not limited to such applications.
Certain design and processing procedures may cause these extrusions to be susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
Product Information
Published:
08/05/2003
File Size:
1 file , 120 KB
Language:
English
Note:
This product is unavailable in Ukraine, Russia, Belarus
