SAE AMS4122L
Aluminum Alloy Bars, Rods, and Wire Rolled or Cold Finished, and Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6, 7075-T651) Solution and Precipitation Heat Treated
SAE International , 05/30/2012
$28.00
$56.00
This specification covers an aluminum alloy in the form of rolled or cold finished bars, rods, and wire, and of flash welded rings.
These products have been used typically for parts requiring high strength where limited formability is acceptable.
Certain design and processing procedures may cause these products to be susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
These products have been used typically for parts requiring high strength where limited formability is acceptable.
Certain design and processing procedures may cause these products to be susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
Product Information
Published:
05/30/2012
File Size:
1 file , 42 KB
Language:
English
Note:
This product is unavailable in Ukraine, Russia, Belarus
