SAE AMS4037P
Aluminum Alloy, Sheet and Plate, 4.4Cu - 1.5Mg - 0.60Mn (2024; -T3 Flat Sheet, -T351 Plate) Solution Heat Treated
SAE International , 12/19/2011
$33.00
$66.00
This specification covers an aluminum alloy in the form of sheet and plate.
These products have been typically used for formed structural parts of good strength. Plate is also suitable for structural machined parts where warpage, during maching, due to residual stresses must be minimized, but usage is not limited to such application.
Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
These products have been typically used for formed structural parts of good strength. Plate is also suitable for structural machined parts where warpage, during maching, due to residual stresses must be minimized, but usage is not limited to such application.
Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
Product Information
Published:
12/19/2011
File Size:
1 file , 89 KB
Language:
English
Note:
This product is unavailable in Ukraine, Russia, Belarus
