SAE AMS3678/3A
Type 3 15% Glass, 5% Molybdenum Disulfide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE International , 11/30/2010
$19.00
$37.00
This specification covers a polytetrafluoroethylene (PTFE) resin filled with 15% glass fiber and 5% molybdenum disulfide in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.
These products have been used typically for seal components requiring high temperature and pressure resistance and dimensional stability up to 450 \mDF (232 \mDC) with good wear resistance, but usage is not limited to such applications. Each application should be considered individually.
These products have been used typically for seal components requiring high temperature and pressure resistance and dimensional stability up to 450 \mDF (232 \mDC) with good wear resistance, but usage is not limited to such applications. Each application should be considered individually.
Product Information
Published:
11/30/2010
File Size:
1 file , 25 KB
Language:
English
Note:
This product is unavailable in Ukraine, Russia, Belarus
SAE AMS3678/3B
$25.00
SAE AMS3678/3A
$19.00
