This Specification covers epoxy multi-layer (EM) polymer overlays for bridge and parking garage decks. Type EM polymer overlays incorporate a low-modulus epoxy binder and selected aggregate to produce a flexible, skid-resistant, and waterproof overlay. The overlay may be used for both new construction and rehabilitation. The overlay is placed by applying the neat epoxy binder to the surface and broadcasting aggregate. This Specification includes requirements for chemical components, aggregates, storage and handling, surface preparation, surface profile, mixing, placement, and finishing.

Contents

Preface

Section 1 - General

1.1 Scope1.2 Reference Standards1.3 Reference Organizations1.4 Submittals1.5 Polymer conditions1.6 Labeling, storage, and handling of materials1.7 Safety

Section 2 - Products

2.1 Epoxy binder2.2 Aggregate2.3 Polymer Overlay

Section 3 - Execution

3.1 Procedure qualification3.2 Surface preparation3.3 Mixing epoxy binder3.4 Overlay application3.5 Curing3.6 Excess aggregate removal3.7 Joints3.8 Open to traffic

Foreword to checklists

Mandatory Requirements checklist

Submittal checklist