SAE AMS5355J
Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated
SAE International , 11/18/2022
$46.00
$91.00
This specification covers a corrosion-resistant steel in the form of investment castings.
These castings have been used typically for parts requiring good corrosion resistance and strength up to 600 \mDF (316 \mDC), but usage is not limited to such applications.
Certain processing procedures and service conditions may cause these castings to become subject to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions. Where stress-corrosion is considered to be a factor, precipitation heat treatment should be performed at a temperature not lower than 1000 \mDF (538 \mDC).
These castings have been used typically for parts requiring good corrosion resistance and strength up to 600 \mDF (316 \mDC), but usage is not limited to such applications.
Certain processing procedures and service conditions may cause these castings to become subject to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions. Where stress-corrosion is considered to be a factor, precipitation heat treatment should be performed at a temperature not lower than 1000 \mDF (538 \mDC).
Product Information
Published:
11/18/2022
File Size:
1 file , 640 KB
Language:
English
Note:
This product is unavailable in Ukraine, Russia, Belarus
