BS PD ISO/TS 17519:2019

This document specifies the minimum requirements for the material, design construction and workmanship, manufacturing processes, examination and testing at time of manufacture of an assembly of permanently mounted composite tube(s) in a frame with associated components.

Tubes covered by the requirements of this document are:

a) of composite construction, permanently mounted in a transport frame and suitable for specified service conditions, designated as:1) Type 3 — a fully wrapped tube with a seamless metallic liner and composite reinforcement onboth the cylindrical part and the dome ends; or2) Type 4 — a fully wrapped tube with a non-load sharing liner and composite reinforcement onboth the cylindrical part and the dome ends.

b) with water capacities from 450 l up to and including 10 000 l;

c) containing compressed gases but excluding:1) liquefied gases,2) dissolved gases, and3) gases and gas mixtures which are classified for transport as toxic or oxidizing;

d) with working pressure up to 1 000 bar.

This document does not address tubes with working pressure times water capacity (p × V) more than3 000 000 bar·l.Cross References:NACE/TM 0177-2016ISO 10286ISO 11114-1ASTM D2794ISO 9809-3ISO 2808ISO 13769ISO 10156ISO 9809-1ASTM D522ISO 9227ISO 4624ISO 527-2ISO 10298ASTM D1308ASTM D3170ISO 9809-2ASTM G154ISO 14456ISO 11114-2ISO 306ASTM D3418ISO 13341ASTM D4814ISO 14130ISO 1496-3:1995 (R07) Ed 4ISO 11120:2015ISO 7866:2012/COR 1:2014ISO 11439:2013EN 12245:2009CSA/ANSI NGV 2-2016ISO 14623ISO/TR 13086-1ISO 11515ISO 11119DNV GL. DNV -OS -C501: 2013ANSI. AIAA S-081A-2006ASME STP-PT-014